50
LifeBook S2000 Notebook
than NTSC or PAL. In order to connect an S-Video
device, follow these easy steps: (Figure 4-22)
1. Attach the mini S-Video cable adapter (Figure 2-3)
(included with your system accessories) to the S-
Video cable from the device.
2. Align the connector with the jack opening.
3. Push the connector into the jack until it is seated.
When S-Video is connected, you can toggle the S-Video
device on and off by pressing the [F11] key while
holding down the [Fn] key.
Figure 4-22. Connecting an S-Video Device
S Series.book Page 50 Thursday, June 2, 2005 3:28 PM
To Next Page
Loading...
