To Next PageTo Next PageWhy my Fujitsu Lifebook S751 cannot be started?
If your Fujitsu laptop cannot be started, check whether the battery is installed correctly in its compartment. Also, the battery may be dead, so charge the battery, insert a charged battery, or connect the mains adapter to the notebook. Finally, check whether the mains adapter is connected correctly to the notebook.
What to do if the external monitor remains blank with my Fujitsu Laptop?
If the external monitor remains blank, first, switch the external monitor on. If power saving is activated, press any key to continue. Adjust the brightness of the monitor if it is set too low. If the screen output is set to the notebook’s LCD screen, press the key combination to switch the screen output. Finally, switch off the external monitor and the notebook and check whether the power cable is plugged properly into the external monitor and into the power socket, and whether the data cable is properly connected to the notebook and the external monitor. Then, switch on the external monitor and the notebook.
What to do if Fujitsu Lifebook S751 Laptop LCD screen remains blank?
If the notebook’s LCD screen remains blank, press a key or touch the touchpad. If an external monitor or television set is connected, press the key combination to switch the screen output.
Why does my Fujitsu Laptop keyboard type numerals instead of characters?
If certain characters are entered on the keyboard and only numerals are written, the virtual numeric keypad of your device is activated. Press the Num key to deactivate it.
How to resolve external monitor issues (blank or unstable image) on Fujitsu Lifebook S751 Laptop?
If the external monitor is blank or the image is unstable, terminate the application program in Windows by pressing Alt + F4. If the fault persists after closing the program, use the key combination for switching the screen output to switch over to the notebook’s LCD screen. Change the following setting: Set the screen resolution as described in the documentation for your operating system. Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system.
How to fix 'Keyboard error' on Fujitsu Lifebook S751?
If you are using an external keyboard and the error message 'Keyboard error' appears, check the connection and reboot the notebook.
How to fix 'Keyboard controller error' on Fujitsu Lifebook S751?
If the error message 'Keyboard controller error' appears, switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch on the notebook again.
What does 'nn Stuck key' mean on Fujitsu Laptop?
If the error message 'nn Stuck key' appears, make sure that no key is pressed.
What to do if my Fujitsu Lifebook S751 stops working?
If your Fujitsu laptop stops working, it may be in energy saving mode, so leave energy saving mode. If an application programme has caused the malfunction, close the application program or restart the notebook (by restarting the operating system or switching the device off and back on again). Also, the battery may be dead, so charge the battery, insert a charged battery, or connect the mains adapter to the notebook.
How to fix Fujitsu Laptop when the printer does not print?
If the printer does not print, make sure that the printer is switched on and ready for operation. Also, check that the data cable connecting the notebook to the printer is properly connected. Finally, check whether the correct printer driver is loaded.
General| Graphics | Intel HD Graphics 3000 |
|---|---|
| Operating System | Windows 7 Professional |
| Optical Drive | DVD Super Multi Drive |
| RAM | 4 GB |
| Display | 1366 x 768 pixels |
| Weight | 2.1 kg |
| Battery | 6-cell Lithium-ion |
| Ports | USB 3.0, USB 2.0 |
| Wireless | Wi-Fi 802.11 a/b/g/n |
