To Next PageTo Next PageWhy my Fujitsu Laptop cannot be started?
If your Fujitsu Laptop cannot be started, check if the battery is correctly installed. If it is, try charging the battery, inserting a charged battery, or connecting the mains adapter to the notebook. Then, switch the notebook on.
Why does my Fujitsu Lifebook S761 Laptop keep turning off by itself?
If your Fujitsu LIFEBOOK notebook turns off by itself, it could be due to several reasons. The power management settings might be set to short auto timeouts; press any key or move the mouse to restore operation, or adjust the timeout values in the Power Options Properties in the Control Panel. Ensure the power adapter is correctly plugged in and the outlet has power. If operating on battery, connect a power adapter, as the system may have entered Dead Battery Suspend mode. A battery failure could also be the cause; verify the battery condition using the Status Indicator panel and replace any shorted batteries.
What to do if Fujitsu Lifebook S761 system battery is dead?
Contact your sales outlet or our customer service centre.
What to do if my Fujitsu Lifebook S761 has a stuck key?
Make sure that no key is pressed on your Fujitsu Laptop.
How to fix Fujitsu Lifebook S761 keyboard error with external keyboard?
If you are using an external keyboard with your Fujitsu Laptop and encounter a keyboard error, check the connection and reboot the notebook.
How to fix Fujitsu Lifebook S761 Laptop keyboard controller error?
If you encounter a keyboard controller error on your Fujitsu Laptop, switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch it on again.
What to do if my Fujitsu Laptop keyboard types numerals instead of letters?
If certain characters are entered on the keyboard of your Fujitsu Laptop and only numerals are written, press the Num key to deactivate the virtual numeric keypad.
Why is my Fujitsu Lifebook S761 Laptop external monitor blank or image unstable?
If the external monitor connected to your Fujitsu Laptop is blank or the image is unstable, terminate the application program in Windows by pressing Alt + F4. If the fault persists, switch over to the notebook’s LCD screen using the key combination for switching the screen output. Then, change the screen resolution and select the correct monitor in your operating system settings.
What to do if Fujitsu Laptop LCD screen remains blank?
If the LCD screen of your Fujitsu Laptop remains blank, press any key or touch the touchpad. If you have an external monitor or television set connected, press the key combination to switch the screen output.
Why is my external monitor blank when connected to my Fujitsu Lifebook S761 Laptop?
If the external monitor connected to your Fujitsu Laptop remains blank, first, ensure the monitor is switched on. If it is, check if power saving mode is activated by pressing any key. Also, adjust the monitor's brightness if it's set too low. If the screen output is set to the notebook's LCD screen, use the key combination to switch the screen output. Finally, verify that the power and data cables are properly connected to both the monitor and the notebook, ensuring both devices are switched off during the check.
General