Why Fujitsu Notebook pc cannot be started?
Your Fujitsu Notebook PC might not start due to several reasons: * The battery might not be installed correctly. Ensure it is properly placed in its compartment. * The battery might be dead. Try charging it, inserting a charged battery, or connecting the mains adapter. * The power adapter might not be connected correctly. Verify its connection to the notebook.
What to do if Fujitsu Notebook pc LCD screen remains blank?
If your Fujitsu Notebook PC's LCD screen remains blank, the monitor might be switched off. Try pressing a key or touching the touchpad. Alternatively, if an external monitor or television is connected, press the key combination to switch the screen output.
Why only numerals are written when certain characters are entered on Fujitsu Notebook pc?
If only numerals appear when typing characters on your Fujitsu Notebook PC, the virtual numeric keypad is likely activated. Press the Num key to deactivate it.
What to do if external monitor remains blank with Fujitsu Notebook pc?
If your external monitor remains blank when connected to your Fujitsu Notebook PC, consider these possible causes and solutions: 1. The monitor might be switched off. Ensure the external monitor is powered on. 2. Power saving might be activated. Press any key to continue. 3. The brightness might be set too low. Adjust the brightness of the monitor. 4. The screen output might be set to the notebook's LCD screen. 5. The power or data cables may be improperly connected. Turn off both the monitor and notebook, check the cable connections, and then turn them back on.
What to do if Fujitsu Notebook pc stops working?
If your Fujitsu Notebook PC stops working, here are a few things to check: * The notebook might be in energy-saving mode. Try exiting the energy-saving mode. * An application might be causing the issue. Close the application or restart the notebook. * The battery might be dead. Charge the battery, insert a charged one, or connect the mains adapter.
How to fix incorrect date or time on Fujitsu Notebook pc?
You can correct the date and time on your Fujitsu Notebook PC through the BIOS-Setup-Utility, where you can set the date and time in the main menu. If the issue persists, further assistance is needed.
Why does printer not print from Fujitsu Notebook pc?
If your printer isn't printing from your Fujitsu Notebook PC, consider these possibilities: * The printer might not be switched on. Ensure the printer is on and ready. * The printer might not be connected correctly. Check the data cable connecting the notebook to the printer. * The printer driver might be faulty, incorrectly installed, or the wrong one. Verify the cable connection and ensure the correct printer driver is loaded.
What to do if LCD screen is difficult to read on Fujitsu Notebook pc?
If the LCD screen on your Fujitsu Notebook PC is difficult to read, it could be due to reflected glare. Try turning the notebook or adjusting the tilt of the screen. You can also increase the screen's brightness.
What to do if external monitor image is unstable on Fujitsu Notebook pc?
If the external monitor image is unstable on your Fujitsu Notebook PC, it might be because the wrong external monitor has been selected or the wrong screen resolution has been set for the application program. Terminate the application program in Windows by pressing Alt + F4. If the fault persists after closing the program, switch over to the notebook’s LCD screen. Set the screen resolution as described in the documentation for your operating system. Select monitor 1 or 2 as described in the documentation for your operating system.
How to solve keyboard controller error on Fujitsu Notebook pc?
To solve a keyboard controller error on your Fujitsu Notebook PC, switch the notebook off using the ON/OFF switch, wait 3-5 seconds, and then switch it back on.
To Next Page
General