47
- Touchpad/Active Digitizer/Touchscreen
Clicking on Active Digitizer Display
To left-click, touch the object you wish to select and then
lift the stylus tip immediately.
Figure 24. Clicking on the Active Digitizer Display
Figure 25. Right-clicking Active Digitizer
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding
the front of the toggle button down while
tapping on the screen. To change the settings
for the right-click feature, go to Start ->
Control Panel -> Hardware and Sound ->
Pen and Touch. In the Pen Options tab, select
“Press and Hold” then click the [Settings]
button.
To Next Page
Loading...
