How to adjust Fujitsu Laptop screen brightness?
If the LCD screen is difficult to read, turn the notebook or alter the tilt of the LCD screen to avoid reflected glare. Increase the brightness of the screen.
Why is my Fujitsu LIFEBOOK T937 external monitor blank?
If the external monitor remains blank, first ensure that the monitor is switched on. If power saving mode is activated, press any key to continue. Adjust the brightness of the monitor if it is set too low. If the screen output is set to the notebook’s LCD screen, press the key combination to switch the screen output. Check that the power and data cables are properly connected to both the notebook and the external monitor. Ensure all connections are secure, then switch on the external monitor and the notebook.
What to do if Fujitsu LIFEBOOK T937 battery indicator not working?
If the battery indicator does not illuminate, switch off the notebook. Check that the battery is properly installed in its compartment, and then switch the notebook back on. Also, ensure the Tablet PC is connected to a mains outlet using the mains adapter, keeping in mind that the battery will only charge if its capacity is less than 90%.
How to enable wireless connection on Fujitsu Laptop?
If the wireless connection to a network does not work, switch the wireless component on. Check whether the wireless connection is switched on via the software.
How to resolve Fujitsu LIFEBOOK T937 Laptop external monitor issues?
If the external monitor is blank or the image is unstable, terminate the application program in Windows by pressing Alt + F4. If the fault persists after closing the program, use the key combination for switching the screen output to switch over to the notebook’s LCD screen. Change the screen resolution and select the appropriate monitor in your operating system settings.
Why does my Fujitsu Laptop keyboard type numbers instead of letters?
If certain characters are entered on the keyboard and only numerals are written, it means that the virtual numeric keypad of your device is activated. To solve this problem, press the Num key.
Why does my Fujitsu Laptop beep?
If a beep sounds every few seconds, it indicates that the battery is almost flat. Charge the battery.
How to calibrate pen on Fujitsu LIFEBOOK T937 Laptop?
If the cursor does not correctly follow the pen movements, calibrate the pen as shown under Hardware and Sound / Tablet PC Settings in the Control Panel.
How to improve Fujitsu LIFEBOOK T937 Laptop battery life?
If the battery discharges too quickly, bring the notebook up/down to a normal temperature again. If the operating time of the battery life is extremely short, replace the battery if necessary. Use the mains adapter as frequently as possible. Set the screen slightly darker with the key combination for decreasing the screen brightness in order to reduce the amount of power being drawn.
How to troubleshoot Fujitsu Laptop printer connection?
If the printer does not print, ensure the printer is switched on and ready. Check that the data cable connecting the notebook to the printer is properly connected. Verify that the correct printer driver is loaded.
Covers general safety, radio component safety, energy saving, travel, and cleaning guidelines.
Guides through unpacking, selecting a location, connecting the adapter, and first power-on.
Instructions for using the device as a Tablet PC with touch and pen input.
Summary of security features and setup for fingerprint and palm sensors.
Managing BIOS, boot, disk passwords, and security lock features.
Covers SmartCard reader, SystemLock installation, user groups, and operations.
Configuration of TPM and on-screen keyboard for BitLocker password entry.
Procedures for installing/removing memory modules and M.2 storage devices.
To Next Page
General