Security functions
Disabling TPM
• Requirement: You have set a supervisor password, see "Security functions", Page 60.
► Call up the BIOS Setup and select the Security menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Disabled to deactivate the TPM.
► In the Exit menu, choose the option Exit Saving Changes.
► Press the enter key and select Yes.
Your notebook will now restart and TPM will be disabled.
Enable password entry using the on-scre en keyboard
(on-screen keyboard for BitLocker password)
If TPM is activated, in the BIOS Setup you can enable an on-screen keyboard
for the internal touch screen.
► Call BIOS Setup and select the Advanced menu.
► Mark Boot Config ura tions and press the enter key.
► From the UEFI Boot On-Screen Keyboard selection, choose the option Enable or Disable.
► In the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The noteb ook restarts and the password dialogue is displayed.
Tap on the password field to enable the on-screen keyboard.
80 Fujitsu