Fujitsu LIFEBOOK T937 - Connect the Notebook to the Port Replicator

Working with the notebook
Connect the notebook to the port replicator
► Disconnect the ma ins adapt er cable from the DC socket (DC IN) of the notebook.
3
4
5
1
2
2
► Position the notebook on the Port Replicator so that the connector on the b ase of the
notebook is aligned with the connector of the Port Replicator (1).
► Press do
wn on the notebook’s rear corners so that it locks into position (2).
► Connect the mains power adapter cable to the DC voltage socket (DC IN) of the port rep licator (3).
► Connec
t the power cable to the mains adapter (4).
► Plug the power cable into the mains socket (5).
Fujitsu 57