Connecting external devices
USB connection with charging function (USB Type-C
™
)
USBconnectionwithchargingfunction(USBType-C™)
At this USB port , you can charge a connected USB device or operate devices without
an additional power supply (e.g. a monitor or p rinter).
This is also possible with connected notebook computers by going to the BIOS Setup Utili ty
under the menu Advanced > M iscellaneous Configurations and activating the function USB Type-C
Power Delivery on System-Off. Instructions for how to call up and operate the BIOS Setup
Utility can be found in section "
Settings in BIOS Setup Utility", Page 96.
USB devices are hot-pluggable. This means you can connect and disconnect
the ca bles of USB devices while the system is running.
Additional information can be found in the documentation for the USB devices.
+
► Connect the data cable to t he
external device.
► Connect the data cable to a U SB port
(USB Type-C
™
) of the notebook.
84 Fujitsu
To Next Page
Loading...
