Security functions
Installing SystemLock
InstallingS yst emLock
During initial installation, the first SmartCard becomes the Admin SmartC ard. Together with
the P UK, it has all access rights, and should therefore be kept in a safe place. It can only
be used by the authorised user (administrator), e.g. to initialise user cards.
You need an Admin SmartCard if you want to set up a user group. You use the
Admin SmartCard to add further systems to the user group.
Setting up the first system in a us er group or a stand-alone
system for use with SystemLock
Usergroups
► Start the device and call up BIOS Setup.
► From the Security menu, choose the option SmartCard SystemLock.
The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
► Insert a new SmartCard in the reader a nd press Enter.
70 Fujitsu
To Next Page
Loading...
