Troubleshooting and tips
Error message/c ause Resolution
Previous boot incomplete - Default configuration
used Due to an error during the previous syste m
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
► Press the
F1
function key when prom
pted
to do so.
Real time clock error
► Contact your sales ou tlet or
our customer
service centre.
nnnnK Shadow RAM failed a
t offset: xxxx F ailing
Bits: zzzz
► Contact your sales ou tlet or our customer
service centre.
System battery is dead - Replace and r un SETUP
► Contact your sales ou tlet or our customer
service centre.
System cache error - Cache disabled
► Contact your sales ou t
let or our customer
service centre.
System ti mer error
► Contact your sales ou tlet or our customer
service centre.
Restoring the contents of the hard disk
under Windows
Restoring the system under Windows 10
If necessary,
you c an reset your system to the o riginal state of the hard disk.
► Beginning at
the right edge of the Windows Start screen or the desktop, use a
finger to swee
p over the screen to open the Action Centre.
► Select Al l settings.
► Select Upda
te & security.
► Select Recovery.
► Select acc
ording to your requirements from the options given.
Fujitsu 107
To Next Page
Loading...
