x
NOTE:
The screens and illustrations shown in this
examples may slightly vary depending on the
operating environment that you have installed.
B. If you are located in New Zealand
1. Click start select Control panel select
"Phone and Modem Options".
2. Choose “New Zealand in What Country/
region are you in now? pull down menu
bar.
3. Select Phone system as "Tone Dialing".
4. Click OK.
NOTE: Modem setting in Windows
Vista
A. If you are located in Australia
1. Click Start select Control panel select
"Phone and Modem Options".
2. Choose "Australia" in What Country/
region are you in now? pull down menu
bar.
3. Select Phone system as "Tone Dialing".
4. Click OK.
LB_Fennec 00 (Intro) 28/12/06, 02:47 pm10
To Next Page
Loading...
