User-Installable Features
33
Checking the memory
capacity
1. Turn on the notebook.
2. Click the Start button and select Control
Panel.
The Control Panel window appears.
3. Click System and Maintenance.
4. Click System.
5. Check whether the numeric value has
increased by the size of the memory you
have added.
The notebook specifications may vary
between countries, please check with your
local distributor for actual configuration.
If the memory is not installed correctly,
an error message "Expansion memory
error" may be displayed when you turn
on the notebook. If such a message
appears, turn off the notebook, remove
the memory module and reinstall it.
Changing memory module
The memory module installed on your notebook
can be replaced with a larger size of memory.
1. Turn off the notebook and disconnect the
AC adapter from it.
2. Close the LCD panel and place the
notebook upside down.
3. Remove the screw(s) securing the
memory compartment cover and remove
it.
Remove memory compartment cover at the
bottom of the notebook.
If the numeric value displayed does not
agree with the memory capacity of your
notebook, check the newly installed
memory module.
However, in the case of a system with
integrated graphics solutions, or shared
graphics solutions that utilizes a portion
of a computer’s system RAM, the total
memory size available to the Operating
System will be less than the size of
installed memory module(s).
Memory
compartment
cover
LB_Fennec 04 (30-34) 9/1/07, 04:49 pm33
To Next Page
Loading...
