Fujitsu Lifebook - Checking Installed Memory; Changing the Memory Module

34
4. Remove the memory module.
Displace the hook on each side from the
memory module. The memory module
comes up slightly. Pull the memory module
diagonally up to detach it from the slot.
5. Install a new memory module.
Insert the memory module diagonally into the
slot with the notch in the memory module
aligned with the projection on the connector.
Push memory module down until it clicks into
place.
After you have installed or remove a
memory module, check the memory
capacity of you notebook to verify that
the memory module is installed properly.
6. Attach the memory compartment cover.
Attach the cover removed in step 3.
Notch in the memory module
Memory
compartment
cover
LB_Fennec 04 (30-34) 4/1/07, 03:48 pm34