Getting Started with your LifeBook
Notebook
27
• Ignore keyboard action
When the keyboard is used, sensitivity is
temporarily lowered.
• Confirm calibration when user logs on
Select [Confirm calibration when user
logs on] if you want to recognize the
current orientation as horizontal at logon.
• Perform calibration automatically
when user logs on
Select [Perform calibration automatically
when user logs on] if the system is
normally used on a horizontal surface.
• Display a balloon tool tip when impact
is detected
When this is selected, a message is
displayed from the Shock Sensor Utility
icon (
) in the Notification Area when
an impact is detected.
• [Calibrate Now]
The calibration is executed. Please
position the computer as horizontally as
possible, then click the [Calibrate Now]
button. The current horizontal position will
be recognized as the true horizontal by
performing the calibration.
3. Click the [OK] or [Cancel] button (
). The
[Setup] window closes.
Notes
Before using the Shock Sensor utility, please be
aware of the following points.
• The Shock Sensor Utility does not completely
protect the HDD of the computer.
• The Shock Sensor Utility does not provide the
computer with absolute security.
• The computer may stop temporarily while HDD
head is being retracted. To start the computer
again, please keep it horizontal.
• The Shock Sensor Utility does not protect an
external HDD; it only protects the HDD built
into the computer.
Requirements
Microsoft
®
Windows Vista™
Ultimate
Microsoft
®
Windows Vista™
Home Premium
Microsoft
®
Windows Vista™
Home Basic
Microsoft
®
Windows Vista™
Business
Microsoft
®
Windows Vista™
Enterprise
3 MB or more
System
OS
Available
hard disk
space
• The Shock Sensor works only when a user
is logged onto the computer. It does not
work when the computer is shut down, when
a user is not logged on, when in sleep mode,
or while being shut down.
• The “Lock computer when carried” function
is available only on certain models. This
function can be selected from the menu of
those models which support it.
• While the Shock Sensor Utility Settings
window is displayed, the “Lock computer
when carried” function does not work.
Please close the window to use the function.
System Requirements
The Shock Sensor Utility runs under the following
operating environment.
LB_Fennec 03 (26-29) 28/12/06, 02:48 pm27
To Next Page
Loading...
