EasyManua.ls Logo

Fujitsu MS-6178MICROATX WH5 - Acpi Suspend Type; Video off Method

Fujitsu MS-6178MICROATX WH5
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 3CHAPTER 3
CHAPTER 3CHAPTER 3
CHAPTER 3
AWARDAWARD
AWARDAWARD
AWARD
®
BIOS SETUP BIOS SETUP
BIOS SETUP BIOS SETUP
BIOS SETUP
3-21
ACPI Suspend Type
This item will set which ACPI suspend type will be used.
Power Management
This category allows you to select the type (or degree) of power
saving and is directly related to the following modes:
1. Suspend Mode
2. HDD Power Down
There are three selections for Power Management, two of which have fixed
mode settings.
Min. Power Saving Minimum power management. Suspend Mode = 1
hr., and HDD Power Down = 15 min.
Max. Power Saving Maximum power management — Suspend
Mode = 1 min., and HDD Power Down = 1 min.
User Defined (default) Allows you to set each mode individually.
When not disabled, each of the ranges are from
1 min. to 1 hr. except for HDD Power Down
which ranges from 1 min. to 15 min. and disable.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video
buffer.
DPMS (default) Initial display power management signaling.

Table of Contents

Related product manuals