114
- Restoring Your Pre-installed Software
Re-installing Individual Drivers and Applications
The Drivers and Applications Restore disc can be used to selectively re-install drivers and/or applications
that may have been un-installed or corrupted.
To re-install drivers and/or applications:
1 Attach an external DVD drive to your system.
2 Boot up the system and insert the DAR disc into the external drive after Windows has started. A Fujitsu Installer
screen is displayed after the disc is inserted.
3 After reading the License Agreement, click [I agree].
4 A window will appear containing a list of applications, drivers, and utilities that you can install from the DAR disc.
5 In the list, check off all the components you want to install. If you want to install all components, click [Select
All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green
components separately.
6 Once you have selected the components you wish to install, click [Install Selected Subsystems]; the
components will be installed.
7 After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system.
• THERE MAY BE CERTAIN FREE THIRD-PARTY APPLICATIONS PRE-INSTALLED ON YOUR SYSTEM THAT
ARE NOT ON THE DAR DISC. THE LATEST VERSIONS OF THE APPLICATIONS CAN BE DOWNLOADED
FROM THE THIRD-PARTY’S WEBSITE.
• THE DAR DISC IS BOOTABLE. IF YOUR SYSTEM IS SET TO BOOT FROM THE DVD DRIVE, YOU CAN
AUTOMATICALLY BOOT TO THE RECOVERY AND UTILITIES TOOL.
THE COMPONENTS LISTED ARE COLOR-CODED IN TERMS OF THEIR INSTALL STATUS. BLUE INDICATES
THAT THE COMPONENT CAN BE INSTALLED. GREEN INDICATES THAT THE COMPONENT NEEDS TO BE
INSTALLED SEPARATELY. GREY INDICATES A COMPONENT THAT IS ALREADY INSTALLED; GREY ITEMS
CAN BE REINSTALLED, BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE
COMPONENT IS ALREADY INSTALLED.
To Next Page
Loading...
