To Next PageTo Next PageHow to reset picture settings on Fujitsu P23T-6 IPS Monitor?
If your Fujitsu monitor's picture is wrongly adjusted, run the Factory Recall function in the OSD menu. You should see an 'Auto Processing' message appear.
What to do if my Fujitsu P23T-6 IPS says 'No Signal'?
If your Fujitsu monitor displays a 'No Signal' message, first ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
Why is there no screen display on my Fujitsu Monitor but the power light is on?
If the Fujitsu monitor screen is not displaying anything but the power indicator is lit, you can try the following: * Ensure that the computer is switched on. * Verify that the data cable is correctly attached to the monitor port on the computer. * Press any key on the keyboard to exit power saving mode. * Adjust the brightness and/or contrast settings until you get a picture.
How to troubleshoot a Fujitsu Monitor with no screen display and no power light?
If the Fujitsu monitor screen is completely black and the power indicator is not lit, check these things: 1. Try changing the 0W switch on the rear of the monitor to setting 1. 2. Make sure the power cable is correctly connected to the monitor. 3. Confirm that the computer is switched on.
General