Why nothing is heard from the other side during a call using Fujitsu Monitor?
If you can't hear the other party during a call using your Fujitsu Monitor, ensure that the USB headset or USB telephone conference system is set as the primary device for voice calls in Microsoft Lync / Skype for Business. "Fujitsu Call Indicator" must not be selected as the primary device for voice calls.
Why is Fujitsu P24-8 WE Pro Monitor screen becoming darker?
The screen of your Fujitsu Monitor may be becoming darker because the background lighting has a limited lifetime. Contact our Service Desk.
What to do if the picture is wrongly adjusted on my Fujitsu P24-8 WE Pro Monitor?
If the picture on your Fujitsu Monitor is wrongly adjusted, try running the Factory Recall function. The Auto Processing message will then appear.
Why is my Fujitsu Call Indicator not recognised by the operating system?
If the Fujitsu Call Indicator is not recognized by the operating system, verify that the monitor is connected to the computer using the supplied USB cable and check if Call Indicator is enabled in the OSD menu.
What to do if Fujitsu P24-8 WE Pro picture is wrongly adjusted?
If the picture on your Fujitsu Monitor is wrongly adjusted, try running the Factory Recall function.
Why is Fujitsu Monitor picture position not correct?
If the picture position on your Fujitsu Monitor is not correct, it might be recognizing an undefined mode. Try running the Auto adjust function.
What to do if Fujitsu P24-8 WE Pro picture disturbances appear (horizontal lines, picture noise)?
If you observe horizontal lines or picture noise on your Fujitsu Monitor, try running the Auto adjust function.
What to do if Fujitsu Monitor picture disturbances appear (vertical lines)?
If you are experiencing picture disturbances such as vertical lines on your Fujitsu Monitor, try running the Auto adjust function.
What to do if Fujitsu P24-8 WE Pro Monitor displays 'Frequency out of range' error?
If your Fujitsu Monitor shows a 'Frequency out of range' message, it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software or set a different screen resolution.
What to do if Fujitsu Monitor picture is shaking?
If the picture on your Fujitsu Monitor is shaking, check that the data cable is correctly attached to the monitor port on the computer. You can also try running the Auto adjust function.
General safety regulations and precautions for using the device.
Guidelines for using and replacing the monitor's power cable.
Steps for unpacking the monitor and verifying package contents.
Connecting the monitor to power and data sources.
Details on connecting data cables to the monitor's ports.
Connecting the monitor and computer to power and data.
How to power the monitor on and off and understand the indicator light.
Overview of monitor settings accessible via the control panel and OSD.
Explanation of the monitor's control panel buttons and OSD menu structure.
Adjusting image parameters like phase, clock, and position.
Accessing and configuring advanced features like presence sensor and proximity.
Fine-tuning display brightness, contrast, and black levels.
To Next Page
General