38
Modular RAID Controllers
Modular RAID 6Gb/s (SAS2.0)
4.2.1 Features
●
Industry-proven MegaRAID
®
data protection
●
Flexibility for both SAS 2.0 and SATA II
●
Advanced management and configuration suites
●
Supports RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60
●
Optionally secured with BBU
●
Offers advanced MegaRAID functionality to integrated LSI SAS
●
3.3 V / 12 V PCIe add-in card
●
8-lane 5.0 Gbit PCIe host bus
●
8 SAS/SATA ports
●
Each SAS/SATA port supports SSP, SMP and STP
●
Support for the following STP features:
– Addressing of SATA targets through expander
– Native Command Queuing (NCQ)
●
Support of the following SSP features:
– Wide port functionality (2 or 4 Phys from a single quad port)
– Narrow port functionality (1 Phy)
– Compatible with SATA target devices
●
2
Mini SAS 4i
SFF-8087 connectors
●
Hot-plug drives
●
SGPIO interfaces for signaling of SAS/SATA ports
●
Hardware XOR for RAID parity calculations
●
72-bit wide 512 MB of DDR2 800 (with ECC)
To Next Page
Loading...
Need help?
General
