Need help?Do you have a question about the Fujitsu UTB-YCA and is the answer not in the manual?
General| Brand | Fujitsu |
|---|---|
| Model | UTB-YCA |
| Category | Controller |
| Language | English |
Procedures that could result in death or serious injury if improperly performed.
Procedures that could result in personal harm or property damage if improperly performed.
Description of the central remote controller's system architecture and connectivity.
Highlights the key functionalities and operational areas of the central remote controller.
Defines key terms related to controller operation, groups, and addresses.
Details the identification and purpose of each button and display element.
Step-by-step guide for starting and stopping the central remote controller.
Explains how to view the operating status and select control numbers.
Procedure for selecting individual, group, or all control modes for settings.
Lists all available functions and their corresponding reference pages for details.
Procedure for storing group information for central control management.
How to restrict settings on standard remote controllers via central control.
Settings and procedures for saving and reproducing operating conditions.
Instructions for starting and ending zone operation for selected indoor units.
Procedure to reset the filter indicator after cleaning or replacement.
How to turn all connected indoor units ON or OFF simultaneously.
Procedure for starting or stopping operation of selected indoor units.
Guide to changing the operating mode (e.g., Cool, Heat, Auto).
Instructions for adjusting the desired room temperature for indoor units.
How to select and set the fan speed for indoor units.
Adjusting the vertical angle of the louvers for airflow control.
Adjusting the horizontal angle of the louvers for airflow control.
How to enable and disable vertical and horizontal airflow swing operations.
Procedure to activate energy-saving mode for economical operation.
How to select and cancel the anti-freeze operation to prevent freezing.
How to set the timer to stop indoor units at a specific time.
How to set the timer to start indoor units at a specific time.
Guide for setting up daily ON/OFF times for a week, including copy/paste.
Procedure to set the current time, date, and display format.
How to start and navigate the error monitoring screen.
Explanation of error codes for indoor, outdoor, and central remote controllers.
How to restart the central remote controller using the ACL switch.
Details supply power, power consumption, size, and weight of the controller.
Illustrations and measurements for the operation panel and transmission adaptor.
To Next Page
