39
5. OPERATION
SETTING METHOD
5-5. FAN SPEED SETTING
Enter the control mode to select the central control
number (the indoor units) whose fan speed needs
to be changed.
Refer to “3-3. CONTROL MODE” for information
about control modes.
Press
FAN
CONTROL
to set the desired for speed.
The setting is applied to the indoor units associ-
ated with the selected central control number. Be-
cause of the change of the setting, LED
SET
will
come on.
It is necessary to transmit the newly set information
to the relevant indoor units. Refer to steps 4, 5 and
notes of “3-3. CONTROL MODE” for details.
CHECK
ACL
MASTER
ENERGY ANTI
FAN
TIMER
SET
TIMER
DELETE
TIMER
DAY
CLOCK
ADJUST
DAY OFF
TEMP.
MEMORY
OPERATION
MEMORY
TEST
SET
CENTRAL
DELETE
BACK
GROUP
ZONE
ON OFF
TIME
CONTROL
CONTROL
FILTER
RESET
CONTROL
FREEZE
COPY
TIMER
MODE
SAVE
SETTING SETTING
To Next Page
Loading...
Need help?
General
