Fujitsu UTB-YCA User Manual

32
5. OPERATION
SETTING METHOD
5-1. ALL OPERATION / ALL STOP
5-1-1. All operation
Press . will light up. An all opera-
tion signal will be transmitted in the system imme-
diately.
A beep sound “Beep Be” signals the end of the trans-
mission.
When the transmission has been completed,
and will go out.
5-1-2. All stop
Press . will light up. An all stop
signal will be transmitted in the system immediately.
A beep sound “Beep Be” signals the end of the trans-
mission.
When the transmission has been completed,
and will go out.
CHECK
ACL
MASTER
ENERGY ANTI
FAN
TIMER
SET
TIMER
DELETE
TIMER
DAY
CLOCK
ADJUST
DAY OFF
TEMP.
MEMORY
OPERATION
MEMORY
TEST
SET
CENTRAL
DELETE
BACK
GROUP
ZONE
ON OFF
TIME
CONTROL
CONTROL
FILTER
RESET
CONTROL
FREEZE
COPY
TIMER
MODE
SAVE
SETTING SETTING

Fujitsu UTB-YCA Specifications

General

Brand	Fujitsu
Model	UTB-YCA
Category	Controller
Language	English