Fujitsu UTB-YCA User Manual

20
4. CENTRAL
CONTROL METHOD
4-1. GROUP INFORMATION STORE
It is necessary to do group information store before group control is conducted with the central
remote controller.
The following shows the procedure of group information store.
4-1-1. To do group information store
Press
GROUP
SETTING
to enter the group information store
mode.
Select the group number whose group information
store need to be performed with and set by
pressing
SET
.
Press to select the central control number
to be stored in the selected group. Press
SET
to
store.
To continue group information store, press
BACK
to return to the group number selection screen of 1
and repeat steps 2 and 3. To complete the group in-
formation store, press
GROUP
SETTING
in the group selec-
tion screen shown in step 1.
CHECK
ACL
MASTER
ENERGY ANTI
FAN
TIMER
SET
TIMER
DELETE
TIMER
DAY
CLOCK
ADJUST
DAY OFF
TEMP.
MEMORY
OPERATION
MEMORY
TEST
SET
CENTRAL
DELETE
BACK
GROUP
ZONE
ON OFF
TIME
CONTROL
CONTROL
FILTER
RESET
CONTROL
FREEZE
COPY
TIMER
MODE
SAVE
SETTING SETTING

Fujitsu UTB-YCA Specifications

General

Brand	Fujitsu
Model	UTB-YCA
Category	Controller
Language	English