EasyManua.ls Logo

Fujitsu PRIMEQUEST 3800E2 - 12. Power Supply Unit (PSU)

Fujitsu PRIMEQUEST 3800E2
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FUJITSU Server PRIMEQUEST 3800E2 System Configuration Guide
10.Power Supply Unit (PSU) July 2019, Ver.2.0
200V Normal PSU
MC-5HPS71 / MCX5HPS71 (LD)
- Max. 4x PSUs can be mounted for PSU redundancy.
- 80PLUS® Platinum certified
200V Normal PSU for DMBU
MC-5HPS91 / MCX5HPS91 (LD)
- 1x PSU_M is included for Disk/MMB Unit.
- Max. 2x PSU_Ms can be mounted for PSU redundancy.
- 80PLUS® Platinum certified
Power Cords
IOU
4
4
2
2
*1: At least 3 PSUs and 1 PSU_M are required. No installation restriction of components.
4 PSUs and 2 PSU_Ms configuration is resistant to failure of one power supply unit. Dual power feed is not possible.
*2: At least 2 PSUs and 1 PSU_M are required. The maximum number of I/O unit is 2.
3 PSUs and 2 PSU_Ms configuration is resistant to failure of one power supply unit.
*3: At least 2 PSUs and 1 PSU_M are required. The maximum number of I/O unit is 2.
4 PSUs and 2 PSU_Ms configuration is dual power feed configuration.
Dual power feed configuration is resistant to one data center power feed failure and PSU failure.
1 + 1 (*2, *3)
Yes
1 + 1 (*1)
>=200
2
2 + 1 (*2) / 2 + 2 (*3)
No
=<165
8
3 + 1 (*1)
1 + 1 (*1)
No
1 + 1 (*2, *3)
Yes
240V
>=200
96 slots
(Max.
12TB)
8
3 + 1 (*1)
=<165
2
2 + 1 (*2) / 2 + 2 (*3)
AC Power
input
# of components
# of PSUs
Dual Power
feed
CPU (W)
DIMM
PCIeSSD
PSU
PSU_M
PSU_M
#1
PSU_M
#0
I/O Unit
#1
I/O Unit #0
LAN
port
PCI Slots
x4
MMB #0
Disk
Unit_M
#1
PSU#3
PSU#2PSU#1
PSU#0
MMB #1
Disk Unit #0
HDD/SSD
RAID
Card
FBU
SB #0
Memory
x12 slots
CPU
Memory
x12 slots
CPU
SB #1
Disk Unit #1
Disk Unit_M #0
HDD/SSD
RAID
Card
FBU
Disk
Unit_M
#2
Disk
Unit_M
#3
I/O Unit
#2
I/O Unit
#3
SB #2
SB #3
No PSU is included in the Base unit,
At least two PSU's need to be mounted per system.
Max. 4x PSUs can be mounted for PSU redundancy.
One PSU_M is included for Disk/MMB Unit.
Max. 2x PSU_Ms can be mounted for PSU redundancy.
If the number of IOU or PCIe SSD exceed the above limit in the PSU 2 + n configuration (*2, *3), it
is necessary to check the power consumption of the configuration.
For request of configuration check, please submit request to the contact shown below
fj-mktg-pq@dl.jp.fujitsu.com
23 of 42

Related product manuals