CX2550 M1
Operating Manual 33
5 Hardware installation
V CAUTION!
●
Follow the safety instructions in the chapter "Important information"
on page 21.
●
Do not expose the server node to extreme environmental conditions
(see "Ambient conditions" on page 17). Protect the server node from
dust, humidity and heat.
●
Make sure that the server node is acclimatized for the time indicated
in this table before putting it into operation.
In the table "Acclimatization time", the temperature difference refers
to the difference between the operating environment temperature and
the temperature to which the server node was exposed previously
(outside, transport or storage temperature).
Temperature difference (°C) Minimum acclimatization time
(hours)
53
10 5
15 7
20 8
25 9
30 10
Table 1: Acclimatization time
To Next Page
Loading...
Need help?
General