iRMC-related status signals
8
AC
connected
indicator
green on
is on in the following cases:
– the system is in power-off
mode but connected to the
mains (AC connected)
– the system has been switched
on and is in power-on delay
I After connecting the server
to the mains it takes about
60 seconds until the server
enters the standby mode.
off
is off in the following cases:
– the system is not connected to
the mains
– the system is powered on and
in normal operation (S0)
ID indicator
Global error
indicator
Description
blue flashing off
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
blue flashing orange flashing
An emergency flash of the iRMC firmware
is in progress.
Pos. Symbol Indicator Status Description
To Next Page
Loading...
