TX150 S8 / TX200 S7
Upgrade and Maintenance Manual 47
4 Basic hardware procedures
4.1 Using diagnostics information
Use the Fujitsu ServerView Suite management software to plan the upgrade or
replacement of hardware components. Please refer to the following ServerView
Suite topics:
– Operation
– Maintenance
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.
Please contact your local Fujitsu customer service partner for details on the
service concept and on how to order expansion kits or spare parts. Use the
Fujitsu Illustrated Spares Catalog to identify the required spare part and obtain
technical data and order information. Illustrated Spares catalogs are available
online at http://manuals.ts.fujitsu.com/illustrated_spares (global market only).
Perform the following diagnostics procedures to identify defective servers and
components.
4.1.1 Locating the defective server
When working in a datacenter environment, switch on the ID indicator on the
front and rear connector panels of the server for easy identification.
Ê Press the ID button on the front panel or use the ServerView Operation
Manager user interface to switch on the system ID indicator LEDs.
I For further information, refer to the "ServerView Suite Local Service
Concept (LSC)" manual.
Ê When using ServerView Operations Manager to toggle the ID indicator,
choose Single System View and press the Locate button.
Ê Remember to switch off the ID indicator after the maintenance task has been
concluded successfully.
To Next Page
Loading...
