Fujitsu PRIMERGY TX200 S7 - Starting Up and Operation; Drive Access and Control Panel

TX200 S7 Operating Manual 61
6 Starting up and operation
V CAUTION!
Follow the safety instructions in chapter "Important information" on
page 35.
6.1 Access to the drives (floorstand model)
6.1.1 Enabling access to the accessible drives
Figure 5: Removing the drive cover and placing it on the HDD cover
Ê Unlock the server (1).
Ê Remove the drive cover (2).
Ê Attach the drive cover to the recesses on the HDD cover (3).
Ê Push down the HDD cover in the direction of the arrow (4).