Fujitsu PRIMERGY TX2540 M1 User Manual

76 Operating Manual TX2540 M1
Starting up and operation
Indicator of hot-plug power supply unit (450 W and 800 W PSU module)
Figure 14: Indicator on hot-plug power supply unit
1 Indicator of hot-plug power supply unit (bicolor)
450 W power supply unit and 800 W power supply unit
Flashes green when the server is switched off, but mains voltage is
present (standby mode).
Lights up green when the server is switched on and functioning
properly.
Lights up orange in case of OCP/OVP or when the fan of the power
supply unit has failed.

Fujitsu PRIMERGY TX2540 M1 Specifications

General

Processor socket	-
Intel Xeon series	E5-2400
Built-in processor	No
Motherboard chipset	Intel® C602
Number of processors supported	2
Number of DIMM slots	12
Supported memory types	DDR3-SDRAM
Maximum internal memory	192 GB
RAID levels	0, 1, 10
Hot-swap HDD bays	Yes
Storage drive sizes supported	3.5 \
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA, Serial Attached SCSI (SAS)
LAN controller	Intel I210
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB 2.0 ports quantity	6
Chassis type	Tower
Product color	Black