02-25
1-6 DIP SW2-6 and 2-7 setting forbidden.
1-7 DIP SW2-8 setting.
SRAM Battery
SW2-8
ON
OFF
SW 2-6 OFF
SW 2-7 OFF
SRAM Battery ON / OFF
When installing the control remote controller, this switch must be set to ON.
(factory setting:OFF)
OFF
ON
At the time of shipment,the battery is turned off to avoid electricity consumption.
Be sure to set this switch to ON.
1-8 SW42 Initial setting button
( Factory setting)
This switch is used when initializing the central remote controller.
To Next Page
Loading...
