Fujitsu ScanSnap S1300 Installation & Troubleshooting Guide

Installing in Mac OS
51
Installing in Mac OS
This section explains how to install the software in Mac OS.
■ System requirements
*1 : It is recommended to apply the latest updates to the Mac OS.
*2 : Evernote for Mac is not supported for versions earlier than Mac OS X v10.5.8.
*3 : Bundled with S1500M.
When using Mac OS X v10.7, you need to use an Adobe Acrobat version which supports Mac
OS X v10.7.
For information about the Adobe Acrobat versions officially supported on Mac OS X v10.7,
visit the website of Adobe Systems Incorporated.
*4 : When using a USB 3.0 port, data is transferred at the same speed as USB 2.0.
Operating system
(*1)
Mac OS X v10.7 Mac OS X v10.6 Mac OS X v10.5 Mac OS X v10.4
(*2)
CPU
Intel
®
Core™ 2 Duo 2.4 GHz or higher recommended
(minimum: Intel
®
Core™ Duo 1.83 GHz or PowerPC G5 1.6 GHz)
Memory 2 GB or more 1 GB or more
512 MB or more
(1 GB or more recommended)
Display
resolution
1024 × 768 pixels or higher
Hard disk space
Disk space required to install the software bundled with the ScanSnap is as follows:
z ScanSnap Manager: 800 MB
z ABBYY FineReader for ScanSnap: 570 MB
z Cardiris: 130 MB
z Evernote for Mac: 55 MB
z Adobe Acrobat 9 Pro (*3): 1540 MB
USB port (*4) USB2.0 / USB1.1
z Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not
function properly).
z Make sure to use a powered hub equipped with an AC adapter if you are using a
commercially available USB hub.
z If the USB port or the USB hub is USB 1.1, scanning speed will slow down.
z If the CPU or the memory do not meet the required specifications, scanning speed will slow
down.
z A disk space approximately three times larger than the resulting scanned file size is required
when scanning documents.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g