Fujitsu ScanSnap S1300 Getting Started Guide

Getting Started
P3PC-2712-03EN
1
Thank you for purchasing ScanSnap S1300 (hereinafter referred to as "the ScanSnap"). This manual describes
the preparation required for use of the ScanSnap. Follow the preparation procedures described in this manual.
For details about ScanSnap functions and features, basic operation, daily care, and consumable replacement,
refer to the Operator's Guide (PDF) which is available on the Setup DVD-ROM. Keep this manual in a safe place
so that you can refer to it at any time when using the ScanSnap.
Microsoft, Windows, Windows Vista, Excel, and PowerPoint are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, the Apple logo, Mac, Mac OS, iPhoto, and Rosetta are trademarks of Apple Inc.
ABBYY™ FineReader™ Engine ©2011 ABBYY. OCR by ABBYY
ABBYY and FineReader are trademarks of ABBYY.
Other company names and product names are the registered trademarks or trademarks of the respective companies.
August 2011
© PFU LIMITED 2009-2011
Checking the Components
Make sure that all items shown below are included in the package.
If any other packaging is provided, make sure to store it as well. Make sure to handle the components with care.
The box and packaging materials are required for storage and transportation of the ScanSnap. Do not throw them
away.
If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner
service provider.
ScanSnap (× 1)
USB cable (× 1)
AC adapter (× 1)
AC cable (× 1) (*)
Setup DVD-ROM
(× 1)
Getting Started (× 1)
(This manual)
Safety Precautions (× 1)
USB bus power cable
(× 1)
(*) The contents may vary depending on the
country and the ScanSnap model purchased.
Rack2-Filer (× 1)
(Exclusive to S1300 with
Rack2-Filer)
Power cable
S1300_Soft_e_GS_JP_EN.fm Page 1 Tuesday, July 12, 2011 2:59 PM

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g