To Next Page
P
Penny WalkerAug 5, 2025
What to do if scanning does not start on Fujitsu Scanner?
- PpamelamcmahonAug 5, 2025
If scanning does not start on your Fujitsu Scanner, ensure ScanSnap Manager is installed. Check that the USB cable is correctly connected, and if using a hub, verify its power supply, using a powered USB hub with an AC adapter if necessary. Disconnect and reconnect the AC cable and AC adapter, waiting at least five seconds. If resuming from hibernation, move the mouse or press a key before scanning. If the ScanSnap Manager icon isn't displayed, locate and start it from the ScanSnap installation folder in Applications.
General
