EasyManua.ls Logo

Fujitsu ScanSnap S300M - User Manual

Fujitsu ScanSnap S300M
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Please read this guide before connecting the scanner to your computer.
For further details, refer to the "ScanSnap S300M Operator’s Guide"
included in the supplied ScanSnap Setup CD-ROM.
Contents
Introduction .........................................................1
Conventions ........................................................6
Safety Precautions ..............................................8
Chapter 1 Preparation .......................................12
1.1 Checking the Contents of the Package .......... 12
1.2 Names and Functions of Parts ....................... 13
Chapter 2 Connecting the ScanSnap ...............15
2.1 Installing the Supplied Software ..................... 15
2.2 Connecting the ScanSnap.............................. 18
Chapter 3 How to Use the ScanSnap ...............23
3.1 Scanning Documents ..................................... 23
3.2 About the Scanning Settings .......................... 23
3.3 Scanning Office Documents........................... 24
3.4 Scanning Business Cards using Cardiris ....... 26
Chapter 4 Troubleshooting ...............................29
4.1 Troubleshooting Checklist .............................. 29
4.2 Clearing Paper Jams...................................... 32
Chapter 5 Daily Care ........................................33
5.1 Cleaning Materials.......................................... 33
5.2 Cleaning the ScanSnap Exterior .................... 33
5.3 Cleaning Inside of the ScanSnap ................... 34
Chapter 6 Consumables ...................................35

Other manuals for Fujitsu ScanSnap S300M

Questions and Answers

  • P
    Penny WalkerAug 5, 2025
    What to do if scanning does not start on Fujitsu Scanner?
    • P
      pamelamcmahonAug 5, 2025
      If scanning does not start on your Fujitsu Scanner, ensure ScanSnap Manager is installed. Check that the USB cable is correctly connected, and if using a hub, verify its power supply, using a powered USB hub with an AC adapter if necessary. Disconnect and reconnect the AC cable and AC adapter, waiting at least five seconds. If resuming from hibernation, move the mouse or press a key before scanning. If the ScanSnap Manager icon isn't displayed, locate and start it from the ScanSnap installation folder in Applications.

Fujitsu ScanSnap S300M Specifications

General IconGeneral
Max Document SizeA4
Color Depth24-bit
Duplex ScanningYes
InterfaceUSB 2.0
Automatic Document Feeder (ADF)Yes
ADF Capacity10 sheets
Scanning TechnologyCIS
Scan Speed (Color, A4, 300 dpi)8 ppm (pages per minute)
Supported Operating SystemsWindows, Mac OS
Power SourceUSB
Optical Resolution600 x 600 dpi

Related product manuals