Fujitsu SMARTCASE S500 - Step 2 Installing the Heatsink

Assembly Instructions SMARTCASE S500
__________________________________________________________________________________________________________________________________________________________
Page 4 of 18 www.fujitsu.com
Step 2 Installing the Heatsink
Fujitsu provides both a passive and an active heatsink solution, and a common mounting backplate.
Before assembling the mainboard into the chassis, it is recommended to install the optional onboard components
like cooler, RAM, M.2, etc.).
Mounting Backplate
Do not remove the insulating
foil of the backplate, otherwise
the mainboard may be
damaged due to possible short
circuit
(backplate position)
Note: Mounting holes
are asymmetrical!