Need help?Do you have a question about the Fujitsu ErgoPro m664 Series and is the answer not in the manual?
General procedures for system servicing, including grounding yourself for safety.
How to verify and set the system's input voltage for proper operation.
Step-by-step guide on how to open and close the computer case.
Instructions for primary and optional methods to remove/install the system board.
Steps to safely remove the system's power supply unit.
Procedure for removing and installing hard disk drives.
Procedure for removing and installing floppy disk drives.
Procedure for removing and installing CD-ROM drives.
Steps to remove or install additional adapter cards in expansion slots.
Detailed steps for safely removing a Pentium II processor.
Instructions for installing and removing DIMM memory modules.
Guide on how to replace the system's CMOS battery.
Explanation of configuration jumper settings and their operational modes.
Steps to access the system's BIOS setup utility.
Setting user and supervisor passwords, and unattended start options.
Configuring boot sequence, AC/Power loss restore, and wake-up features.
Procedure for upgrading the system BIOS using a diskette.
Explanation of the system's POST process and audible beeps.
List and description of beep codes indicating POST errors.
Common error messages displayed during POST and their explanations.
List of POST codes and the corresponding operations being performed.
Explanation of the system's structure code and its components.
Detailed breakdown of product identification codes by category.
Detailed processor-related specifications for m664-series models.
Overview of system features, audio, graphics, and interfaces.
Details on chipset, BIOS, memory, expansion slots, and dimensions.
Table showing possible memory configurations using DIMM sockets.
Specifications for the system's power supply unit.
List of available spare parts, their part numbers, and MTBF.
To Next Page
General