Fujitsu ESPRIMO P9910 User Manual

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

System

Operating Manual

FUJITSU Desktop

ESPRIMO P5xxx / P7xxx / P9xxx

Table of Contents

Questions and Answers:

K
kirsten12Jul 26, 2025
Why does my Fujitsu ESPRIMO P9910 monitor remain blank?
- S
  Sabrina MontoyaJul 26, 2025
  If the monitor remains blank when using your Fujitsu Desktop, first ensure the monitor is switched on. If it is, power saving mode might be activated; press any key or deactivate the screen saver. Also, check the brightness control to ensure it isn't set too low. Verify that the power and monitor cables are correctly connected to both the device and the power outlet. If problems persist, restart the system, press F8 during boot, start in Safe Mode, and set up the monitor as described in your operating system and monitor documentation.
B
Bethany ChanAug 1, 2025
How to fix a Fujitsu ESPRIMO P9910 when the power indicator is off?
- C
  Craig SandersAug 1, 2025
  If the power-on indicator remains unlit after switching on your Fujitsu Desktop, it could be due to a faulty mains voltage supply. Check whether the power cable is properly plugged into the device and a grounded mains outlet. Alternatively, the internal power supply might be overloaded. In this case, pull the power plug out of the mains outlet, wait approximately 3 minutes, plug it back into a properly grounded mains outlet, and switch the device on again.
E
Eric ThompsonAug 7, 2025
What to do if my Fujitsu Desktop won't switch off?
- D
  Donna BradshawAug 7, 2025
  If you cannot switch off your Fujitsu Desktop with the On/Off switch due to a system crash, press and hold the On/Off switch for at least 4 seconds until the device switches off. Warning: This may lead to data loss, as the operating system is not shut down properly, potentially causing error messages the next time the system is booted.
R
Ronald AguilarAug 12, 2025
How to restore the mouse pointer on a Fujitsu Desktop?
- I
  Ian RyanAug 12, 2025
  If no mouse pointer is displayed on the screen of your Fujitsu Desktop, the mouse may not be correctly connected. Shut down your operating system properly (e.g., using Ctrl + Alt + Del), switch off the device, and check that the mouse cable is properly connected to the system unit. If you're using an adapter or extension lead, check those connections as well. Ensure only one mouse is connected. Then, switch the device back on. Also, check in the BIOS Setup to ensure that the USB ports being used are enabled.
L
loliverAug 19, 2025
Why is the time and date wrong on my Fujitsu ESPRIMO P9910 Desktop?
- T
  Thomas GonzalezSep 12, 2025
  To correct the time and/or date on your Fujitsu Desktop, set the correct time and date within the operating system or in the BIOS Setup. If the time and date are repeatedly wrong when you switch your device off and then on, the lithium battery may be empty. In this case, change the lithium battery.

Fujitsu ESPRIMO P9910 Specifications

General

Brand	Fujitsu
Model	ESPRIMO P9910
Category	Desktop
Language	English

Summary

Ports and Operating Elements

Important Notes and Safety

Safety Information

Provides essential safety guidance for installing and operating the device.

Getting Started Guide

Unpacking and Checking Delivery

Steps for Initial Setup

Outlines the essential steps to put the new device into operation.

Setting Up the Device

Recommendations for device placement and maintaining ventilation.

Connecting to Mains Supply

Illustrates how to connect the device to a grounded mains outlet.

Connecting External Devices

Device Ports Overview

Details the various ports available on the ESPRIMO desktop and their functions.

Connecting a Monitor

First-Time Power-On and Software Installation

Switching on Monitor and Machine

Instructions on how to power on the monitor and the ESPRIMO desktop.

Installing the Software

Guidance on following on-screen instructions for software installation.

Device Operation

Switching the Device On

Steps to power on the ESPRIMO desktop and ensure it starts correctly.

Switching the Device Off

Procedure for safely shutting down the ESPRIMO desktop.

BIOS Setup Settings

Property and Data Protection

Overview of features for protecting the device and personal data.

Anti-Theft Protection and Lead Sealing

Methods to secure the device against theft and unauthorized access.

Mechanical Casing Lock

BIOS Setup Security Functions

SmartCard Access Authorization

Deleting Data (Erase Disk)

Troubleshooting and Tips

Help for Problem Resolution

Troubleshooting Common Issues

Provides solutions for common problems like the device not powering on.

Device Not Switching Off

Monitor Remains Blank

No Mouse Pointer Displayed

System Expansions and Repairs

Related product manuals

Preview: Fujitsu ESPRIMO P910 E85+

Fujitsu ESPRIMO P910 E85+

Preview: Fujitsu ESPRIMO P556

Fujitsu ESPRIMO P556

Preview: Fujitsu ESPRIMO P400

Fujitsu ESPRIMO P400

Fujitsu ESPRIMO P5010

Preview: Fujitsu ESPRIMO P5730

Fujitsu ESPRIMO P5730

Preview: Fujitsu ESPRIMO P6012

Fujitsu ESPRIMO P6012

Preview: Fujitsu ESPRIMO P5635

Fujitsu ESPRIMO P5635

Preview: Fujitsu ESPRIMO P5 Series

Fujitsu ESPRIMO P5 Series

Fujitsu ESPRIMO P7 Series

Preview: Fujitsu ESPRIMO P4 Series

Fujitsu ESPRIMO P4 Series

Preview: Fujitsu ESPRIMO P15 Series

Fujitsu ESPRIMO P15 Series

Preview: Fujitsu ESPRIMO P372 Series

Fujitsu ESPRIMO P372 Series