Fujitsu ESPRIMO P5 Series - User Manual

Fujitsu ESPRIMO P5 Series

52 pages

To Next Page

To Next Page

Loading...

System

Operating Manual

FUJITSU Desktop

ESPRIMO P5xxx / P7xxx / P9xxx

Table of Contents

Questions and Answers

M
Margaret HammondAug 4, 2025
Why does my Fujitsu Desktop monitor remain blank?
- S
  Sarah ProctorAug 5, 2025
  If the monitor remains blank when using your Fujitsu Desktop, first ensure the monitor is switched on. If it is, power saving mode might be activated; press any key or deactivate the screen saver. Also, check the brightness control to ensure it isn't set too low. Verify that the power and monitor cables are correctly connected to both the device and the power outlet. If problems persist, restart the system, press F8 during boot, start in Safe Mode, and set up the monitor as described in your operating system and monitor documentation.
M
martinezerinAug 11, 2025
How to fix a Fujitsu ESPRIMO P5 when the power indicator is off?
- K
  Kimberly HollowayAug 11, 2025
  If the power-on indicator remains unlit after switching on your Fujitsu Desktop, it could be due to a faulty mains voltage supply. Check whether the power cable is properly plugged into the device and a grounded mains outlet. Alternatively, the internal power supply might be overloaded. In this case, pull the power plug out of the mains outlet, wait approximately 3 minutes, plug it back into a properly grounded mains outlet, and switch the device on again.
J
John WilliamsAug 16, 2025
What to do if my Fujitsu ESPRIMO P5 Desktop won't switch off?
- N
  Nathan NicholsAug 17, 2025
  If you cannot switch off your Fujitsu Desktop with the On/Off switch due to a system crash, press and hold the On/Off switch for at least 4 seconds until the device switches off. Warning: This may lead to data loss, as the operating system is not shut down properly, potentially causing error messages the next time the system is booted.
A
Andre CooleyAug 22, 2025
How to restore the mouse pointer on a Fujitsu ESPRIMO P5 Desktop?
- B
  Brian TownsendAug 22, 2025
  If no mouse pointer is displayed on the screen of your Fujitsu Desktop, the mouse may not be correctly connected. Shut down your operating system properly (e.g., using Ctrl + Alt + Del), switch off the device, and check that the mouse cable is properly connected to the system unit. If you're using an adapter or extension lead, check those connections as well. Ensure only one mouse is connected. Then, switch the device back on. Also, check in the BIOS Setup to ensure that the USB ports being used are enabled.
S
Stephen HillAug 28, 2025
Why is the time and date wrong on my Fujitsu ESPRIMO P5 Desktop?
- N
  nicholaskelleyAug 28, 2025
  To correct the time and/or date on your Fujitsu Desktop, set the correct time and date within the operating system or in the BIOS Setup. If the time and date are repeatedly wrong when you switch your device off and then on, the lithium battery may be empty. In this case, change the lithium battery.

Fujitsu ESPRIMO P5 Series Specifications

General

LAN	Gigabit Ethernet
Processor	Intel Core i5 or i7 (varies by model)
Storage	HDD or SSD options (varies by model)
Graphics	Integrated Intel UHD Graphics or optional dedicated GPU
Operating System	Windows 10, Windows 11, Linux
Ports	USB 3.2, USB 2.0, HDMI, DisplayPort, audio jacks
Connectivity	Ethernet
Weight	Varies by model

Summary

Your ESPRIMO

Validity of the Reference Manual

Outlines the systems covered by this reference manual.

Notational Conventions

Explains symbols and text formatting used in the manual.

Ports and Operating Elements

Front Panel Ports and Controls

Identifies and describes the front-facing ports and operating elements of the device.

Rear Panel Ports and Expansions

Details the rear-facing ports, slots, and expansion options available on the device.

Important Notes

Safety Information

Provides essential safety instructions and warnings for device operation and handling.

Transporting the Device

Gives guidance on how to safely pack and transport the computer.

Cleaning the Device

Instructions on how to properly clean the computer and its components.

Energy Saving and Disposal

Information regarding energy efficiency, proper disposal, and recycling of the device.

Getting Started

Unpacking and Delivery Check

Steps for unpacking the device and verifying the delivery contents.

Initial Setup Steps

Outlines the basic steps required to get the device ready for operation.

Setting Up the Device

Recommendations for physically placing and positioning the computer for optimal use.

Connecting to Mains Power

Guide on how to connect the device to a power outlet, including country-specific plugs.

Connecting External Devices

General instructions and precautions for connecting peripherals to the computer.

Device Ports Overview

Detailed explanation of the various ports available on the device for connectivity.

Connecting a Monitor

Step-by-step instructions for connecting a display to the computer.

Connecting Input Devices

Guidance on connecting mice and keyboards to the device via USB or PS/2 ports.

Connecting Serial and Parallel Devices

Instructions for connecting older peripherals via serial or parallel interfaces.

Connecting USB Devices

Information on connecting devices using the Universal Serial Bus (USB) ports.

Installing the Cable Cover

Procedure for installing the optional cable management cover for a tidy setup.

First-Time Power On and Software Installation

Steps for the initial startup of the device and the installation of its operating system.

Powering On the System

Instructions on how to turn on the computer and monitor to begin operation.

Software Installation Process

Details on how to proceed with the software installation, including online resources.

Operation

Device Power Control

How to switch the computer on and off correctly for normal operation.

Device Indicators Explained

Description of the status lights on the device and their meanings.

Keyboard Usage and Features

Overview of the keyboard layout and basic operation.

Key Shortcuts and Functions

Explains important keys and common keyboard shortcuts for system operation.

BIOS Setup Configuration

Guide to accessing and modifying system settings within the BIOS Setup utility.

Property and Data Protection

Measures and features for protecting the device and personal data from unauthorized access.

Anti-Theft and Casing Security

Methods to prevent theft and unauthorized opening of the computer casing.

Mechanical Casing Lock

Instructions for using the optional mechanical lock to secure the device casing.

BIOS Security Functions

Details on security features available within the BIOS Setup for data protection.

SmartCard Access Control

Information on using SmartCards for system access authorization.

SmartCard Reader Operation

Guidance on operating the optional SmartCard reader.

Data Deletion

Explanation of the Erase Disk function for securely deleting data from storage devices.

Troubleshooting and Tips

Problem Resolution Guidance

Advice on where to find solutions for common computer issues.

Common Troubleshooting Scenarios

Solutions for frequently encountered problems with the device.

Usage Tips and Optimization

Advice on improving system performance and usage efficiency.

System Expansions and Repairs

Technical Data

Related product manuals

Preview: Fujitsu ESPRIMO P400

Fujitsu ESPRIMO P400

Preview: Fujitsu ESPRIMO P556

Fujitsu ESPRIMO P556

Fujitsu ESPRIMO P5010

Preview: Fujitsu ESPRIMO P5730

Fujitsu ESPRIMO P5730

Preview: Fujitsu ESPRIMO P5635

Fujitsu ESPRIMO P5635

Preview: Fujitsu ESPRIMO PH300

Fujitsu ESPRIMO PH300

Preview: Fujitsu ESPRIMO P6012

Fujitsu ESPRIMO P6012

Preview: Fujitsu ESPRIMO P4 Series

Fujitsu ESPRIMO P4 Series

Preview: Fujitsu ESPRIMO P910 E85+

Fujitsu ESPRIMO P910 E85+

Fujitsu ESPRIMO P7 Series

Preview: Fujitsu ESPRIMO P15 Series

Fujitsu ESPRIMO P15 Series

Preview: Fujitsu ESPRIMO P372 Series

Fujitsu ESPRIMO P372 Series