Getting started
Setting up the device
WorkstationErgonomicD evice
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the man y different fin ishes an d v arn ishes used on furniture, it is possible
that the rubber feet w ill mark the surface they stand on.
Depending on your device location, disturbing vibrations and noises may occur. In
order to avoid this, a minimum distance of 10 mm / 0.39 inch to other devices or
objects should be maintained on housing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
For ventilation surfaces, a minimum distance of 200 mm / 7.87 inch
from the device must be maintained.
Do not stack several devices on top of each other.
Do not expo se the device to extreme ambient conditions (see "
Technical data", P age 4 4,
section "Ambient conditions"). Protect the device against dust, humidity and heat.
14 Fujitsu
To Next Page
Loading...
Need help?
General