Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety information
SafetyinformationNote
Please note the informat
ion provided in the "Safety/regulations" manual
and in the following safe
ty notes.
When installing and ope
rating the device, please observe the notes on
environmental conditi
ons in Chapter "
Technical data", Page 44 as well as
the instructions in Cha
pter "
Getting s tarted", P age 13.
When setting up the dev
ice, make sure there is clearance all around it so that
thecasingreceives
enough ventilation. In order to avoid overheating, do not
cover the ventilati
on are as of the mon itor or the device.
You must only opera
te the device if the rated voltage used by the
device is set to the
local mains voltage.
The main switch (if
present) and the ON/OFF switch do not disconnect the
device from the ma
ins voltage. To co mpletely disconnect from the mains
voltage, remove t
he pow er plug from the power socket.
Only opera te th
e device w ith the casing closed.
Replace the lit
hium battery o n the mainboard in accordance with the instructions
in ma nual "Syst
em Upgrades and Repairs".
Caution, comp
onents in the system can get very hot.
The activiti
es described in these instructions must always be
performed wi
th the greatest care.
Repairs to th
e device must only be performed by qualified technicians.
Incorrect r
epairs could put the user at great risk or cause serious dam age
to the equi
pment (electric shock, risk of fire).
Transpor
ting the device
Device,Transp o
rtation
Retrans
portation
Transport all parts separa tely in their original packaging or in a packaging which
protects them from knocks and jolts, t o the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought fro m a c old environment into the room where it will b e used,
condensation may occur. Before operating the device, w ait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Fujitsu 11
To Next Page
Loading...
Need help?
General