PC Specialist's Handbook ErgoPro m664-series
Edition 1 - Release 1 - March 1998 Page 1-3
Checking the Input Voltage Setting
A 235 W in m664-series power supply is integrated into the chassis to provide power for the system board, add-
in cards, and peripheral devices. A switch (A) on the system rear panel can be used to set the power supply to
operate at:
115 V AC (in the range of 90 - 135 V AC), or
230 V AC (in the range of 180 - 265 V AC)
To verify that your system has the correct setting for your environment, check the input power selection switch.
A
Picture 3 : Checking the Input Voltage Setting
To Next Page
Loading...
Need help?
General