EasyManua.ls Logo

Fujitsu ESPRIMO Q956 - User Manual

Fujitsu ESPRIMO Q956
108 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
System
Operating Manual
FUJITSU Desktop
ESPRIMO Q55x / Q958
ESPRIMO Q956 / Q957

Table of Contents

Questions and Answers

  • D
    daniel70Aug 5, 2025
    What to do if the monitor remains blank on my Fujitsu ESPRIMO Q956?
    • V
      Vanessa Ramirez PhDAug 5, 2025
      If the monitor remains blank, first ensure it is switched on. If power saving is active, press any key or deactivate the screen saver, entering your password if prompted. Also, check the brightness control; it might be set too low. Ensure the power and monitor cables are correctly connected to both the Fujitsu Desktop and the power outlet. If the issue persists, restart the system, press F8 during boot to enter Safe Mode, and set the correct monitor values as detailed in your monitor's manual. The causes could be a switched off monitor, activated power saving, brightness control set to dark, disconnected power or monitor cables, or incorrect monitor settings.
  • D
    Dawn TurnerAug 9, 2025
    Why is the power-on indicator unlit on my Fujitsu ESPRIMO Q956?
    • S
      Scott AndersonAug 9, 2025
      If the power-on indicator is unlit after switching on your Fujitsu Desktop, it could be due to a faulty mains voltage supply or an overloaded internal power supply. Check that the power cable is properly plugged into both the device and a grounded mains outlet. If that doesn't work, unplug the device from the mains socket, wait about 3 minutes, then plug it back in and switch the device on.
  • B
    bridgetferrellAug 14, 2025
    What to do if Fujitsu ESPRIMO Q956 Desktop cannot be switched off with the On/Off switch?
    • A
      Andre FullerAug 14, 2025
      If you can't switch off your Fujitsu Desktop with the On/Off switch due to a system crash, press and hold the On/Off switch for at least 4 seconds until the device switches off. Be aware that this action could lead to data loss because the operating system is not shut down properly.
  • D
    Deborah HornAug 18, 2025
    How to fix no mouse pointer displayed on the monitor of Fujitsu ESPRIMO Q956 Desktop?
    • R
      Robert MartinezAug 18, 2025
      If no mouse pointer is displayed on the monitor of your Fujitsu Desktop, the mouse may not be properly connected. Shut down the operating system correctly, switch off the device, and check that the mouse cable is properly connected. If you're using an adapter or extension lead, check the plug-in connection. Ensure only one mouse is connected before switching the device back on.
  • A
    Allison SolisAug 22, 2025
    What to do if SmartCard reader is not recognised on Fujitsu Desktop?
    • A
      Andre ReedAug 22, 2025
      If your Fujitsu Desktop's SmartCard reader is not recognized, it might be due to incorrect chip card insertion, a forgotten PIN, or a lost SmartCard. Ensure the SmartCard is inserted correctly with the chip facing upwards and that it complies with ISO standard 7816-1, -2, -3, and -4. If you've forgotten your PIN or lost your SmartCard and are working in a network, contact your system administrator.
  • E
    Eric MorrisonAug 27, 2025
    How to correct the date and time on my Fujitsu Desktop?
    • J
      Jennifer LucasAug 27, 2025
      If the date and time are incorrect on your Fujitsu Desktop, it means they are set incorrectly. You can correct this by setting the accurate time and date within your operating system or via the BIOS Setup.
  • S
    Sarah ClarkAug 31, 2025
    What to do if user and/or supervisor SmartCard lost on Fujitsu Desktop?
    • R
      Richard RyanAug 31, 2025
      If you have lost your User SmartCard, you can continue working with the Supervisor SmartCard and initialise a new User SmartCard or deactivate the SystemLock function. If you have lost the Supervisor SmartCard, you can also continue working, but you no longer have all rights and cannot initialise another Supervisor-SmartCard. If you have lost both SmartCards, you cannot boot your system. Please contact our Service Desk. You must provide proof of ownership for the device. Then the Service Desk will refer you to our service partner, who will unlock your device (for a charge).

Summary

Important notes

Safety notes

Provides critical safety information and warnings for device operation and handling.

Getting started

Steps for initial setup

Outlines the essential steps required to set up the device for the first time.

Initial switch-on: Software will be installed

Procedure for the first power-on, including initial software installation.

Operation

Settings in BIOS Setup Utility

Guide to accessing and configuring system settings via the BIOS.

Troubleshooting and tips

Troubleshooting

Common problems and their solutions for device operation.

Monitor remains blank

Solutions for issues where the monitor screen displays no image.

SmartCard reader is not recognised

Fujitsu ESPRIMO Q956 Specifications

General IconGeneral
Volume2 L
Chassis typeMini PC
Product colorBlack
Cable lock slotYes
Placement supportedHorizontal/Vertical
Cable lock slot typeKensington
BIOS typeAMI
Motherboard chipsetIntel® Q170
Internal memory8 GB
Memory channelsDual-channel
Memory clock speed2133 MHz
Internal memory typeDDR4-SDRAM
Maximum internal memory32 GB
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
SSD interfaceSATA III
Storage mediaSSD
Optical drive typeDVD Super Multi
Card reader integrated-
Total storage capacity256 GB
Number of SSDs installed1
On-board graphics card ID1912
On-board graphics card modelIntel® HD Graphics 530
On-board graphics card familyIntel® HD Graphics
Maximum on-board graphics card memory1.74 GB
On-board graphics card OpenGL version4.4
On-board graphics card base frequency350 MHz
On-board graphics card DirectX version12.0
On-board graphics card burst frequency1100 MHz
Number of displays supported (on-board graphics)3
Power supply65 W
Power supply input voltage100 - 240 V
Power supply input frequency50 - 60 Hz
Operating system installedWindows 7 Professional
Operating system architecture64-bit
Wi-Fi standardsWi-Fi 5 (802.11ac)
Bluetooth version4.1
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)5 - 85 %
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity6
USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity0
Sustainability certificatesRoHS, EPEAT Gold, ENERGY STAR
Display includedNo
Tcase66 °C
Bus typeDMI3
SteppingR0
Processor cache8 MB
Processor cores4
Processor modeli7-6700T
System bus rate8 GT/s
Processor familyIntel® Core™ i7
Processor seriesIntel Core i7-6700 Desktop series
Processor socketLGA 1151 (Socket H4)
Processor threads8
Processor codenameSkylake
Processor frequency2.8 GHz
Processor cache typeSmart Cache
Processor lithography14 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version3.0
Processor boost frequency3.6 GHz
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)35 W
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3L-SDRAM, DDR4-SDRAM
Memory voltage supported by processor1.35 V
Memory clock speeds supported by processor2133, 1333, 1600, 1866 MHz
Memory bandwidth supported by processor (max)34.1 GB/s
Maximum internal memory supported by processor64 GB
Scalability1S
Processor codeSR2BU
Processor ARK ID88200
Processor package size37.5 x 37.5 mm
Supported instruction setsSSE4.2, AVX 2.0, SSE4.1
Thermal solution specificationPCG 2015A
Intel Stable Image Platform Program (SIPP) version1.00
Weight and Dimensions IconWeight and Dimensions
Depth191 mm
Width186 mm
Height59 mm
Weight1600 g
Package depth198 mm
Package width395 mm
Package height284 mm

Related product manuals