Operation
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOS SetupUtilitySetupConfigurin gthesystemConfiguring thehardware
With the help of th e BIOS Setup Utility you can adjust the sys tem function s
and the hardwa re configuration for your device.
When it is supplied, the device is set to factory d efault settings. You can change these
settings in BIOS Setup Utility. Any changes you make in the settings take effect as
soon as you save and shut down the B IOS Setup Utility.
The BIOS Setu p Utility program contains the following men us:
Menu Description
Main
System settings such as
time and date
Advanced
Advanced system setti
ngs
Boot
Configuration of the start-up sequence
Power
Power management functions
Security
Password settings
and security functions
Exit
Exits the BIOS Set
up Utility
The following function keys can a lso be used:
Key Description
Esc
to shut down the BIOS Setup Utility
The current settings are not saved.
F7
To discard change s and to load the previous configuration of the BIOS
Setup Utility.
F9
To load the d
efault configuration of the BIOS Setup Utility.
F10
to shut dow
ntheBIOS Setup Utility
The cu rren
t settings are saved.
Startin
gtheBIOSSetupUtility
► Start the device (switch off/on or r eboot the O perating System).
BIOSSetupUtility
Depend
ing on the setting for Fast Boot in the BIOS Setup Utility the following display,
if appl
icable, ap pears on the scree n on start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
F2
.
► If a p
assword has been assigned, enter the password and press the Enter key.
If yo
u have forgotten the password, contact your system administrator
or c
ontact our customer service centre.
The BIOS Setup Utility starts.
Fujitsu 47
To Next Page
Loading...
