Only the parameters accessible to levels :
- End user.
- Commissioning level.
- Engineer level.
Are described in this document.
The access levels are specied in the second column of
the table by means of the letters , and .
The OEM parameters are not described and require a
manufacturer’s access code.
- Choose the desired level.
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter.
- Check the setting by pressing .
- To return the menu, press .
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
Basic
display
OK
Brief press
End user
OK OK OK
Time of day and date Hours / minutes 1 Hours 1...24 h
Operator section Day / month 2 Minutes 0...60 min
Time prog heating circuit 1 Year 3
Press for
3 seconds
End user Commissioning
Engineer
OEM
Time of day and date
Hours / minutes 1
Operator section
Day / Month 2
Time prog heating circuit 1 Year 3
Start of summer time 4
01.01...31.12
End of summer time 5
Line Function Setting range or display Setting
increment
Basic setting
1 Hours / Minutes 00:00... 23:59 1
2 Day / Month 01.01... 31.12 1
3 Year 1900... 2099 1
5 Start of summer time (Day / Month) 01.01... 31.12 1
6 End of summer time (Day / Month) 01.01... 31.12 1
The change of hour will appear at 3:00 am rst Sunday after the regulated date.
20 Language English, Français, Italiano,
Nederlands
22 Info Temporary | Permanent
26 Operation locking On | Off
27 Programming locking Off | On
28 Direct adjustment Automatic storage...
Storage with conrmation
Installation and operating manual "1395 - EN"
Control Box
- 16 -
To Next Page
Loading...
Need help?
General