Fujitsu UTY-RNRYZ1 - Display Item Setting; Maintenance (for Administrator)

(6) When password request item to be set or cleared is
touched, each setting screen is displayed.
(7) Touch the [On] or [Off].
(Example “On Timer” screen)
When the [OK] is touched, the
display returns to the “Change
Setting” screen.
On Timer
Cancel OK
On
Off
Apply the setting.
(8) When setting is complete,
touch the [OK] on the “Change
Setting” screen.
(Example Page 1/4)
On Timer [Off]
[Off]
[On]
Off Timer
Auto Off Timer
Change Setting Page 1/ 4
Cancel OK
Next
Page
After the setting change screen is displayed, the display
returns to the “Password Setting” screen.
(9) When the [Back] on the
“Password Setting” screen is
touched, the display returns to
the “Initial Setting” screen.
Password Setting
Change Password
Change Setting
Back
3-8-7 Display Item Setting
(1) Touch the [Display Item Set-
ting] on the “Initial Setting”
screen.
Back
Previous
Page
Page 2/ 3 Initial Setting
R.C. Sensor
Setting
Password Setting
Display Item
Setting
Master Indoor
Unit Setting
Next
Page
Filter Sign visible/invisible
(2) “Display Item Setting” screen is displayed. Touch the
[Filter Sign] on the “Display Item Setting” screen.
(3) “Filter Sign” screen is displayed. Touch the [Visible] or
[Invisible].
(2) (3)
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Invisible]
Filter Sign
Cancel OK
Visible
Invisible
When the [OK] is touched, the display returns to the
“Display Item Setting” screen.
Room Temp. visible/invisible
(4) Touch the [Room Temp.] on the “Display Item Setting”
screen.
(5) “Room Temp.” screen is displayed. Select the [Visible]
or [Invisible].
(4) (5)
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Invisible]
Room Temp.
Cancel OK
Visible
Invisible
When the [OK] is touched, the display returns to the
“Display Item Setting” screen.
Apply the setting.
(6) When the setting is complete,
touch the [OK] on the “Display
Item Setting” screen.
After the setting change
screen is displayed, the
display returns to the “Initial
Setting” screen.
Filter Sign [Visible]
Display Item Setting
Cancel OK
Room Temp. [Visible]
3-9 Maintenance (for administrator)
Verication, operation, and setting for administrator informa-
tion are performed.
(1) Touch the [Maintenance] on the “Main Menu” screen.
(2) When “Password Verication” screen is displayed, enter
the Password (or Installer Password) and touch [OK].
(1) (2)
Monitor
Previous
Page
Page 2/ 2 Main Menu
Summer Time
Setting
Initial Setting Maintenance
Preference
0
CL
5
1
6
2
7
3
8
4
9
Cancel OK
Password Verification
Enter Current Password
(3) If the password is entered correctly, the “Maintenance”
screen is displayed. The screen has 3 pages which are
switched by touching the [Next Page] or [Previous Page].
Back
Next
Page
Page 1/ 3 Maintenance
Error History
Setting
Status List
Version
Filter Sign
Reset
Previous
Page
Back
Next
Page
Page 2/ 3 Maintenance
Test Run
R.C. Address
Setting
Function Setting
I.U. Address
Verification
Back
Previous
Page
Page 3/ 3 Maintenance
Initialization
Installer Password
Change
Verication, operation, and setting of the following con-
tents are performed. (♦: for installer)
(*: Items that indoor unit does not support are not dis-
played.)
• Error History:
The error history can be veried/cleared.
• Setting Status List:
The status of each setting can be veried as a list.
• Filter Sign Reset*:
After the indoor unit lter is cleaned, the lter sign can
be reset.
• Version:
The software version No. of this unit can be veried.
• Test Run ♦
• R.C. Address Setting ♦
• Indoor Unit Address Verication ♦
• Function Setting ♦
• Installer Password Change ♦
• Initialization ♦
When the [Back] is touched at settings other than initial-
ization, the display returns to the “Main Menu” screen.
When initialization is performed, the setting screen at
initial starting is displayed.
En-19
En-20