• Only the parameters accessible to level :
End user.
Are described in this section.
• The parameters accessible at levels :
Commissioning level.
Engineer level.
… are described in this section reserved for
these professional specialists.
With the screen on basic display.
- Press .
Once in
- Scroll the menu list.
- Choose the desired menu.
- Scroll the function lines.
- Choose the desired line.
- Adjust the parameter.
- Check the setting by pressing
- To return the menu, press
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
Basic
display
OK
Brief
press
End user
OK OK OK
Time of day and date Hours / minutes 1 Hour 1...24 h
Operator section Day / Month 2 Minutes 0...60 min
Time prog heating circuit 1 Year 3
...
Line Function Setting range or display Setting
increment
Basic setting
1 Hours / Minutes 00:00... 23:59 1
2 Day / Month 01.01... 31.12 1
3 Year 1900... 2099 1
20 Language English, Français, Italiano,
Nederlands
500 Pre-selection (Day / Week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday…
501 1
st
phase On (start) 00:00... --:-- 10 min
502 1
st
phase Off (end) 00:00... --:-- 10 min
503 2
nd
phase On (start) 00:00... --:-- 10 min
504 2
nd
phase Off (end) 00:00... --:-- 10 min
505 3
rd
phase On (start) 00:00... --:-- 10 min
506 3
rd
phase Off (end) 00:00... --:-- 10 min
516 Default values, Circuit 1 No, Yes
Yes + OK : The default values memorised in the regulator replace and cancel the customised heating programmes.
Your customised settings are therefore lost.
Operation manual "1408 - EN" - 9 -
Control Box
To Next Page
Loading...
Need help?
General
