To Next PageTo Next PageWhat to do if the 2nd zone sensor is not configured on my Fujitsu Waterstage WOYG140LCTA Heat Pump?
If the 2nd zone sensor is not configured (if 2nd circuits kit), it's because of BX31. Set the parameter 5700 to 2, 4 or 6.
General| Model | WOYG140LCTA |
|---|---|
| Type | Air to Water Heat Pump |
| Heating Capacity | 14.0 kW |
| Cooling Capacity | 12.5 kW |
| Power Supply | 400V, 3-phase, 50Hz |
Lists technical specifications for various models, including electrical and hydraulic data.
Outlines mandatory regulations and professional requirements for installation.
Covers precautions and clearances required for installing the outdoor unit.
Provides instructions for selecting the location and mounting the hydraulic unit.
Details essential rules and precautions for handling refrigerants and making connections.
Explains the essential process of creating a vacuum in the system before filling with refrigerant.
Describes the electrical supply requirements and safety precautions for the heat pump.
Details electrical connection procedures for the single-phase outdoor unit.
Step-by-step guide for the initial startup and testing of the heat pump system.
A comprehensive checklist for pre-startup inspections of the unit and its components.
