To Next PageTo Next PageWhat to do if the 2nd zone sensor is not configured on my Fujitsu Waterstage WOYK140LCTA Heat Pump?
If the 2nd zone sensor is not configured (if 2nd circuits kit), it's because of BX31. Set the parameter 5700 to 2, 4 or 6.
General| Model | WOYK140LCTA |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 14.0 kW |
| Heating Capacity | 16.0 kW |
| Coefficient of Performance (COP) | 4.0 |
| Refrigerant | R410A |
| Power Supply | 400V, 3-phase, 50Hz |
Explains how the heat pump functions.
Precautions and guidelines for installing the outdoor unit.
Precautions and steps for installing the hydraulic unit.
Detailed steps for filling the system with refrigerant gas.
Instructions for connecting the heating circuit pipes.
Instructions for connecting the Domestic Hot Water (DHW) circuit.
Specifics for connecting the single-phase outdoor unit.
Specifics for connecting the three-phase outdoor unit.
Details electrical connections for the hydraulic unit.
Overview and description of the user interface and control options.
Guide to parametering the system settings.
Comprehensive list of function lines for settings and diagnostics.
Lists faults displayed on the hydraulic unit.
Lists faults displayed on the single-phase outdoor unit via LED codes.
Lists faults displayed on the three-phase outdoor unit via LED codes.
Checks related to the refrigerant circuit, including leak detection.
A checklist for performing before starting up the unit.
Detailed pre-startup checks including sight, hydraulic, and electrical.
Step-by-step guide for starting up the heat pump.
