To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu Waterstage WS G140DC6 Series and is the answer not in the manual?
Controls for electric backups, including various operating states.
Details on sensor and input test modes for system diagnostics.
Comprehensive list of hydraulic unit and outdoor unit faults, codes, and indicators.
Techniques for troubleshooting and clearing outdoor unit failures, including specific error codes.
Tables of sensor resistance values at various temperatures.
Details on specific components like compressors and valves, and their troubleshooting.
Technical operating limits for the heat pump.
Common failures in hydraulic, electric, and refrigeration systems.
Methods for checking compressor operation and winding resistance.
Procedures for performing refrigeration circuit leak tests.
General troubleshooting steps for unit startup issues.
Overview of user-modifiable settings and access levels.
Comprehensive table of command lines, functions, and settings.
Detailed explanation of various adjustment functions.
Setting and managing the unit's clock and calendar.
Explains interface functions like Info, Operation Lock, and Programming Lock.
Configuration of time programs for heating, DHW, and cooling.
Details on heating circuit functions like operating mode and setpoints.
Configuration and operation of the cooling circuit.
Settings for domestic hot water heating and legionella protection.
Operational parameters for heat pump functions.
Presetting and configuring the heat pump system.
Managing and understanding error messages and fault history.
Functions for maintenance scheduling and emergency operation.
Procedures for testing inputs, outputs, and sensors.
Viewing the current operating status and messages.
Recommended annual maintenance for the hydraulic circuit.
Recommended annual maintenance for the outdoor unit.
Recommended annual electrical checks and connections.
Routine operating checks and diagnostic procedures.
Steps for removing the service panel from the single-phase unit.
Instructions for removing the top panel of the single-phase unit.
Steps to remove main, filter, and indicator PCBs from the single-phase unit.
Procedure for removing the fan motor from the single-phase unit.
Detailed procedure for compressor removal from the single-phase unit.
Steps for removing the service panel from the 3-phase unit.
Procedure for removing PCBs from the 3-phase unit.
Procedure for removing the fan motor from the 3-phase unit.
Detailed procedure for compressor removal from the 3-phase unit.
Safety and work precautions for refrigerant parts exchange.
General